Concrete Piers
Gold Coast
- Licensed and insured professionals
- 20+ years of field experience
- Fast scheduling and clear communication
Request a Free Quote
Stable Piers, Straightforward Builds
A pier is only as good as the ground it's drilled into, and that's usually where a build either moves smoothly or grinds to a halt. Piers carry the load, hold levels true, and protect the structure for years to come. We set out accurately, drill to spec, and pour to last, which is why builders and homeowners trust our concrete piers on the Gold Coast to hold from day one.
We've seen what happens when this part of the job gets rushed: wrong depths, blowouts in soft ground, poor set-out. All of it ends the same way: failed checks, rework, and a slab or deck that never quite sits right. Scott's been on the tools for 20 years, and
Elite Concrete Solutions has been doing this properly since 2011. We coordinate with your engineer, book the certifier, and leave you with a tidy site and as-built reports you can hand straight to your certifier.
Why Choose Us for Your Concrete Piers?
As specialist piling contractors on the Gold Coast, we keep projects moving with clear steps and clean sites. Here are the advantages that deliver reliable piers, built to meet engineer and certifier requirements.
End-to-End Project Management
We manage soil tests, engineer sign-off, set-out, drilling, cages, pouring, and the final inspection. One crew handles the lot with simple, direct communication, so nothing falls between trades.
Locally Based & Ready to Work
Elite Concrete Solutions has operated since 2011 and is now based on the Gold Coast at Mermaid Waters. The team plans around local soil classes, access limits, and Queensland council and certifier processes.
20+ Years of Industry Expertise
Scott leads the crew with over two decades on the tools. Every pier location, depth, and height follows a practical plan built from real site experience, not guesswork.
Licensed, Insured & Compliant
Full licences, public liability, and workers' compensation are in place on every job, backed by White Card and silica awareness training. SWMS accompany every job from start to finish.
Transparent Quotes
Your quote clearly lists the scope, pier counts, allowances, and disposal with itemised rates. If site conditions change, we talk it through first. No hidden fees.
Trusted Materials
We pour with concrete and steel from established, reputable suppliers so every job starts with quality product.
End-to-End Services
Get piers delivered to plan with clear steps and tidy results. We handle set-out, drilling, steel, concrete, and inspections, so your slab or deck starts right.
When Does a Build Need Concrete Piers?
Not every job needs piers, and part of a good quote is telling you honestly when they do. Piers come into play when the load has to reach past soft or moving ground to something solid, or when levels have to hold on a slope.
Reactive and soft ground
Where soil swells and shrinks with the seasons, or where the surface is sandy and loose, a standard footing can move. Piers carry the load down to stable bearing, so the structure above stays put.
Decks, extensions, and second storeys
Adding weight to an existing home, or building out over a garden, usually calls for piers designed to the new load. Your engineer sets the size and depth, and we drill and pour to match.
Sloping and cut-and-fill blocks
On a slope, pier heights step to keep the frame level and the falls correct. Accurate set-out here is the difference between a deck that sits true and one that fights the ground.
If you are not sure whether your job needs piers, send through the plans or book a site visit and we will give you a straight answer.
What Clients Are Saying About Our Services
We build on accuracy, clear timing, and tidy handovers. Here is what clients say about our pier work and site care.
Piers Built for Gold Coast Ground Conditions
The Gold Coast is a patchwork of coastal canal estates, established family suburbs, and sloping hinterland acreage, and the ground shifts just as much. Conditions swing from soft sandy soils near the waterways at Mermaid Waters, Hope Island, and Currumbin, to reactive clays and steep cut-and-fill blocks through Mudgeeraba, Tallebudgera, and Tamborine Mountain. Based at Mermaid Waters, Elite Concrete Solutions plans every pier around the ground it is drilling into, rather than working off a one-size template.
- Sandy coastal and canal-estate soils near Mermaid Waters, Hope Island, and Currumbin Waters often need piers taken deeper to reach stable bearing, with care taken around groundwater.
- Reactive clay through the hinterland fringe around Mudgeeraba, Tallebudgera, and Worongary moves with the wet and dry seasons, so depth follows the engineer's soil classification rather than guesswork.
- Sloping and cut-and-fill blocks common around Tallai, Tamborine Mountain, and the western suburbs call for accurate set-out and stepped pier heights to keep decks and slabs true.
- South-east Queensland's wet season and higher water tables in low-lying areas affect drilling, so spoil, water control, and access are planned before the rig arrives.
- Queensland certifier and council processes differ from New South Wales, so inspections are booked and documented to suit the local system.
Because the ground behaves differently from one Gold Coast street to the next, the crew reads each site on its own terms, coordinates with your engineer, and drills to the depth the soil actually calls for. That site-by-site approach is what keeps inspections clean and structures stable for the long haul.
The Concrete Piers Gold Coast Process, Start to Finish
We use clear steps to keep your project moving and your site safe. Here is how we plan, drill, and hand over piers built to pass inspection the first time.
Site Inspection
We visit to assess access, soil, and levels against the engineer's scope. Machinery, water control, and spoil routes are confirmed on the spot.
Quote
You receive a detailed quote with pier count, diameters, depth allowances, concrete spec, and timeline. Disposal and any access costs are shown upfront.
Dial Before You Dig & Service Locating
We check plans and mark services before work begins. Drilling stays clear of water, gas, power, and comms to avoid delays and damage.
Safety Site Planning
SWMS, barriers, and access points are set and signed off. Everyone on site knows the sequence and the controls in place.
Site Preparation
We set out with pegs and paint to the engineer's grid and benchmarks. Mats are laid where needed, and cages and concrete are staged for a smooth pour.
Drill & Clean
Holes are drilled to design depth, or to refusal where specified. We bell or underream if required, then clean to sound bearing.
Reinforce & Place
Cages are tied with the correct cover and chairs. Starter bars, hold-downs, or brackets are set to the drawings.
Pour & Finish
Concrete slump is checked, then placed and vibrated for consolidation. We strike to level, tidy the area, and prepare for inspection.
Why Builders and Homeowners Prefer Elite Concrete Solutions
We are one of the few crews that treat pier work as a precision job from set-out to sign-off. You get clear steps, clean sites, and a handover you can trust.
Tight-Access Capability
Compact machines reach narrow side paths and rear yards without tearing up gardens. Hand digging is used near services or wherever a bucket is not safe.
Clean, Documented Handover
You receive photos, levels, and an as-built pier schedule for your records. Certifiers and engineers get what they need without back and forth.
One Point of Contact
You deal with the same foreman from set-out to sign-off. Communication is faster, and details do not get lost between trades.
Reliable Scheduling
Bookings are made early with clear lead times for concrete and inspections. Turnarounds stay steady, so other trades can plan with confidence.
Quality Control
We check slump on arrival and vibrate for proper consolidation. Cover and spacers are verified, so the steel stays protected.
Risk Management
Groundwater, soft spots, and spoil removal are planned before drilling starts. Controls prevent blowouts, delays, and wasted concrete.
Get Your Piers Drilled, Poured, and Signed Off
Request a free on-site quote with a clear plan, timeline, and fixed scope. We schedule quickly, keep you informed, and hand over ready for the next trade.
Frequently Asked Questions (FAQs)
1. What are concrete piers used for?
Concrete piers support loads for homes, extensions, decks, pergolas, carports, and retaining walls. They transfer weight down through soft or moving ground to a stable bearing, which keeps the structure above stable and level.
2. What are bored piers, and when does a build need them?
Bored piers are formed by drilling a hole, placing a steel cage, and filling it with concrete, so the load reaches solid ground below the surface. We specify bored piers on the Gold Coast whenever the surface soil is reactive, sandy, or sloping, or when new weight, a second storey, a deck, or an extension, has to be carried past ground that would otherwise move. Your engineer confirms the size and depth for your site.
3. How deep and wide are the piers?
Size and depth follow the engineer's design and the soil class. We confirm on-site and adjust to reach the required bearing, so the pier does the job it was designed for.
4. Do you handle engineering and inspections?
We coordinate with your engineer and book the certifier. We prepare the site, attend inspections, and provide as-built photos and measurements for your records.
5. Do you remove spoil and excess concrete?
Yes. Where it forms part of the scope, we include demolition, removal, and site cleanup, and the quote lists it clearly so there are no surprises.
6. Do you offer free quotes?
Yes. We provide obligation-free on-site quotes with pier counts, depths, and disposal itemised upfront.
7. How long does a typical piering job take?
It depends on the number of piers, the depth, and site access. We outline realistic timelines in your quote and booking, so you can plan the following trades around them.
8. Do I need council approval?
It depends on the scope and where the work sits. Structural piers usually form part of a building approval that your engineer or certifier manages, and we assist with the process where needed.
9. Which areas do you service?
We work across the Gold Coast and surrounds from our Mermaid Waters base, including Burleigh Heads, Robina, Varsity Lakes, Nerang, Southport, Labrador, Helensvale, Coomera, Upper Coomera, Pimpama, Mudgeeraba, Tallebudgera, and Hope Island, along with the northern corridor around Yatala, Ormeau, and Beenleigh, and into northern New South Wales at Tweed Heads, Kingscliff, and Pottsville. If your suburb is not listed, get in touch to check availability.
10. Are you licensed and insured?
Yes. The team holds full concreting and excavation licences, an HR truck licence, public liability, and workers' compensation cover, with White Card, silica awareness, and SWMS in place on every job.
11. How should I contact you?
Phone or the enquiry form, whichever suits you. Send through your plans or a few details about the site, and we will get straight back to you.